The Squeeze-O-Turn combines the Lift- O-Turn and Lift-O-Squeeze components to create a product that assists in providing load handling for lifting and rotating rolls, barrels, drums, buckets and boxes. The Squeeze-O-Turn mounts to standard LIFT-O-FLEX Lifters and is powered by the Electronic Power Pack.
The Squeeze-O-Turn is easy to configure and adapts to different loads. It is also simple to use and is designed to not damage product(s). The Squeeze-OTurn comes standard with a 12” stroke. An optional 20” stroke is available. The squeeze arms can be mechanically adjusted to fit larger or smaller loads.
Product handling is accomplished with a gentle, controllable force with the Squeeze-O-Turn arms holding the product(s) in place during lifting, transport and rotation. Operation of the unit is simple and easy using the controls mounted on the lift mast.
Features and Technical Data:
Rotation Left or Right
Operator controlled via variable speed joystick to assist in pouring and positioning of the product(s). The rotator also provides continuous rotation in either direction.
Depress the “Squeeze” pushbutton control
Squeeze stops movement based on squeeze pressure preset at the factory
Depress the “Release” pushbutton and the “Inhibit” pushbutton simultaneously
Vertical to Horizontal Applications
Pick product from pallets, floor, shelving etc, rotate 90, 180 degrees for proper orientation for machine interface
At Anderson & Vreeland, our primary focus is to supply our customers with the most innovative material and technological solutions available in the flexographic industry. We have a nationwide staff of technical representatives thoroughly knowledgeable about digital imaging and the fine point of flexo.