Viscosity Control by GAMA

Ink (G25) and glue (G23) viscosity control system

Installation outside the pump or inline who stop the flow of ink or glue for an accurate result while reading the viscosity

VIS-G25-LCD

The VIS-G25 is a control with microprocessor for the regulation of the viscosity of the ink. It calculates the time of fall of a body in the liquid, maintaining constant the viscosity. The detector, installed in danger zone, takes one part of the main flow of ink from the pump to the tank. Thanks to the absence of moving parts and to the auto-washing at the end of work it does not require maintenance by the operator.

APPLICATION

CONSOLE AND COMMAND PANEL

Display LCD 20x4 backlighted, keys for the setting of data with membrane choice of the reference cup, set of the viscosity reference viscosity measured with the precision of 0. 1 sec. temperature compensation graphic bar for the visualization of the viscosity error, error signalation (no ink, no solvent or viscosity over tollerance)

VIS-G25-VID

The VIS-G25 is a control with microprocessor for the regulation of the viscosity of the ink. It calculates the time of fall of a body in the liquid, maintaining constant the viscosity. The detector, installed in danger zone, takes one part of the main flow of ink from the pump to the tank. Thanks to the absence of moving parts and to the auto-washing at the end of work it does not require maintenance by the operator.

CONSOLE AND COMMAND PANEL

PC with monitor RGB 15" and keyboard (touch screen) visualization of all the colors controlled on the same screen visualization of the viscosity by a graphic bar choice of the reference cup, set of the viscosity reference it's possible to save until 1000 different works viscosity measured with the precision of 0. 1 sec, temperature compensation, error signalation (no ink, no solvent or viscosity over tollerance)

APPLICATION

VIS-G23

It has been created as an evolution of the VIS-G25 , which has been modified in order to improve the flow of the glue, that we need to control, considering also all the possible inconveniences. The measuring chambers and the spherical element which read them have been increased , by means of a management software. The washing system has been improved by an intensive cycle and by inserting a fourth pneumatic valve which adds atomised solvent in the circuit. The functioning principle follows the VIS-G25, it calculates the speed of fall of a body in the liquid, keeping constant the viscosity. The detector, located in danger zone, gets some glue which goes from the pump towards the basin. Due to the absence of moving bodies and the innovative self-washing device, at the end of the work intervention or maintenance by the operator is not needed. In fact the cleaning of the entrance and exit of the glue is carried out in automatic mode by pressing just one key and with the 3 valves closed , so that the solvent stays in the detector avoiding dried glue when the machine is not working.

APPLICATION