Anderson & Vreeland Zinc/Magnesium Plate Etching Equipment
       
 

Zinc/Magnesium Plate Etching Equipment

CO.FO.ME.GRA. etching machine for ZINC and MAGNESIUM plates are the results of 30 years of experience in building powderless etching machines,

Other Equipment
Digital Imaging Systems
Solvent-Wash Processors
Water-Wash Processors
Plate Etching Equipment
Vulcanizers
Plate Mounters & More

Used Equipment
236KB PDF

 
 
Ultramatic 40 Ultramatic 90 Ultramatic 200

The machine can be used to etch both zinc and magnesium plates in sizes up to 40x50 cm (16”x20”), Strong construction and corrosion resistant materials assure long life of machines. Plate rotary motion eliminates the possibility of non uniform etching. (A highly sensitive temperature controller reduces to a minimum temperature variations which take place during etching cycle.) Automatic heating is built into the machine, which works in conjunction with either a refrigerator unit or network water cooling.

SPECIFICATIONS
Bath capacity: 40 litres
Automatic etching cycle
Free standing operator’s panel
Electronic paddle speed control up to 750 rpm.
S-shaped paddles
Fume trunking connexion Æ 2” gas
Electrical: 200/240 Volts single phase, 50 or 60 Hz.
Dimensions: 1.160x900x970
(45”Lx35”Wx38”H)
Net weight: 310 Kg. (482 lbs)

OPTIONALS
Refrigerator unit. 4 HP air-cooled refrigerator with chill water tank and circulating pump. PVC exhaust fan: for fumes extraction.
Stainless steel pump: to assure quick draining of the bath.
Acid dispensing system: minimizes hazardous and time-consuming operations.

 The machine can be used to etch both zinc and magnesium plates in sizes up to 50x65 cm (20”x25”), Strong construction and corrosion resistant materials assure long life of machines. Plate rotary motion eliminates the possibility of non uniform etching. (A highly sensitive temperature controller reduces to a minimum temperature variations which take place during etching cycle.) Automatic heating is built into the machine, which works in conjunction with either a refrigerator unit or network water cooling.

SPECIFICATIONS

Bath capacity: 90 litres

Automatic etching cycle

Free standing operator’s panel

Electronic paddle speed control up to 750 rpm.

S-shaped paddles

Fume trunking connexion Æ 80 mm

Electrical: 220/380 Volt, 50 or 60 Hz.

Dimensions: 1600 L x1040W. X1000H. (63”Lx41Wx40”H)

Net weight: 500 Kg. (1100 lbs)

OPTIONALS

Refrigerartor unit. 5 HP air-cooled refrigerator with chill water tank and circulating pump.

PVC exhaust fan: for fumes extraction.

Stainless steel pump: to assure quick draining of the bath.

Acid dispensing system: minimizes hazardous and time-consuming operations.

The machine can be used to etch both zinc and magnesium plates in sizes up to 1016x752 cm (40”x30”), Strong construction and corrosion resistant materials assure long life of machines. Planetary plate motion eliminates the possibility of non uniform etching. (A highly sensitive temperature controller reduces to a minimum temperature variations which take place during etching cycle.) Automatic heating is built into the machine, which works in conjunction with either a refrigerator unit or network water cooling.

SPECIFICATIONS
Bath capacity: 200 litres
Automatic etching cycle
Free standing operator’s panel Electronic paddle speed control up to 750 rpm.
S-shaped paddles
Electrical: 220/380 Volt, 50 or 60 Hz. Dimensions: 2100 L x1500W. X1000H. (82”Lx59"Wx39”H)
Net weight: 500 Kg. (1547 lbs)

OPTIONALS
Refrigerartor unit. 7 HP air-cooled refrigerator with chill water tank and circulating pump. PVC exhaust fan: for fumes extraction. Stainless steel pump: to assure quick draining of the bath. Acid dispensing system: minimizes hazardous and time-consuming operations.

 
     
 
Toll-Free: 866.282.7697
 
info@andersonvreeland.com